4.8/5 2,300+ reviews
4.8/5★★★★★2,300+ reviewsClosed · opens today 8am
Contact us
Searches the whole site: cars we tune, parts, case studies, the Help Centre, services and news. Try RS21JFAP0420Golf RMilltekAdBlue
4.8/5★★★★★2,300+ reviewsClosed · opens today 8am
Stage 1, 2 and 3 figures and the price for your exact engine
KlarnaPay with KlarnaSee our finance options→

Home › News

Updates · 20 November 2026

Alientech KESS3 3.75: Bosch MG1CS201 Locked OBD for BMW, MINI, Supra

KESS3 Upgrade 3.75 adds an OBD protocol for Bosch MG1CS201 Locked ECUs in BMW, MINI and Toyota Supra models from 2021. Bench unlock comes first.

2 min readBy JF AutomotiveMaidstone, Kent

Alientech has released KESS3 Upgrade 3.75, adding an OBD protocol for Bosch MG1CS201 “Locked” ECUs. It covers a wide spread of BMW and MINI models plus the Toyota Supra, on cars from 2021. The release is shown for KESS3 and Powergate, and the source does not call it BETA.

Which ECUs

The ECU is the Bosch MG1CS201 in its “Locked” form. The important detail is how it works: the first step is accessing the control unit in bench mode with KESS3 to unlock it, and after that the connection is OBD. So this is not a plain in-car job from the start. The source lists petrol engines from entry-level 1.5 units up to the 4.4 V8 Bi-Turbo.

Powergate is named alongside KESS3 in the release, so workshops running both should check their software is up to date before starting. As with any locked ECU, a stable power supply during the bench stage is sensible, because an interrupted procedure on a modern controller is an expensive mistake.

Cars this opens up

The supported list in the source is:

  • BMW: 1-Series, 2-Series, 2-Series Gran Coupe, 3-Series, 5-Series, 8-Series, M5, X1, X2, X6, Z4
  • MINI: One, Cooper, Cooper Clubman, Cooper S, Cooper S JCW, Cooper S JCW Clubman ALL4
  • Toyota: Supra

The Supra sharing its ECU family with the BMW range is no surprise, but it is useful to see it confirmed here.

What it means

MG1CS201 cars have been awkward because of the locked ECU. A route that unlocks on the bench once and then works through the OBD port turns repeat work into something much more practical. For owners, that means a car that can be tuned without leaving the ECU removed for long. For dealers, it means a clearer process and a better turnaround once the unlock step is done.

Our tools read and write supported ECUs in line with each supplier’s release, and we will confirm the exact procedure for your car before booking it in. Gains vary by engine and fuel, so we only quote typical figures after looking at the specific car.

Owners can start with our tuning builder. Garages can see our file service and the Alientech tool page.

Garages and tuners Buy or lease the Alientech KESS 3 £2,590ex VAT, with OBD, bench and boot Some of this is a bench job and some of it runs over OBD. You can do it in your own workshop with the Alientech KESS 3, or send us the read and we will build the file. Custom tuning file service Finance and lease What bench tuning means File prices See the Alientech KESS 3 →
Your car next

Put your registration in

Real power and torque for your exact engine, priced, from the same dyno data behind every article on this site.

The JF Automotive team
Meet the team

The team behind every job

Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.

Newsletter

Offers on parts and tuning, first

A short email now and then: new vehicle support, parts deals, open days. Nothing daily.