4.8/5 2,300+ reviews
4.8/5★★★★★2,300+ reviewsClosed · opens tomorrow 8am
Contact us
Searches the whole site: cars we tune, parts, case studies, the Help Centre, services and news. Try RS21JFAP0420Golf RMilltekAdBlue
4.8/5★★★★★2,300+ reviewsClosed · opens tomorrow 8am
Stage 1, 2 and 3 figures and the price for your exact engine
KlarnaPay with KlarnaSee our finance options→

Home › News

Updates · 16 November 2026

Kefico SIM2K-510 OBD Support: Hyundai and Kia 1.6 CRDi Diesels

Autotuner now supports the Kefico SIM2K-510 in OBD VR mode, covering Hyundai and Kia 1.6 CRDi diesels. See which cars are covered and how dealers can...

2 min readBy JF AutomotiveMaidstone, Kent

Autotuner has added the Kefico SIM2K-510 to its supported list, officially in OBD VR mode. This is the Infineon AURIX TC297 based ECU found on a run of Hyundai and Kia 1.6 CRDi diesels, including the 48V mild-hybrid versions. Magic Motorsport Flex also lists the same ECU for OBD and OBD on Bench, so dealers running either tool now have a route in.

Which ECUs

The ECU is the Kefico SIM2K-510 (TC297, triple-core). Kefico started out in 1987 as a Hyundai and Bosch joint venture and is now fully owned by Hyundai Motor Group, which is why you see it across both brands. Autotuner supports it in OBD VR mode, and also OBD VR over Bench for CAN ECUs. The readout is the calibration, with checksum correction handled by the tool. Autotuner quotes a write time of around 4 minutes 30 seconds, or around 8 minutes where an unlock is needed. The source does not state production years or a BETA status for this release.

Cars this opens up

Autotuner lists the following with the 1.6 CRDi diesel in 116 and 136 hp form, engine codes D4FE and D4FB, including the 48V mild-hybrid versions:

  • Hyundai: i30, i40, Kona, Tucson
  • Kia: Ceed, Proceed, XCeed, Optima, Stonic, Sportage

Magic Motorsport’s own page names the Hyundai Kona (2017), Tucson NX4 (2020), Kia Ceed CD (2018), Sportage NQ5 (2021) and Stonic (2017) as examples, and says these are only some of the supported vehicles. Always check the exact vehicle against the supplier’s current list before quoting.

What it means

For owners, a 1.6 CRDi in a family Hyundai or Kia is a popular diesel, and until now many of these were awkward to get a clean file on. Our tools now read and write this ECU over OBD on the listed vehicles, and the file service covers it, so typical gains on this kind of small diesel are modest but noticeable in mid-range pull and economy when driven gently. Use our tuning builder to see what is available for your car.

For dealers, OBD means no ECU removal, which keeps turnaround short and avoids bench time on cars that are often daily drivers. You can use the Autotuner tool or Magic Motorsport Flex directly, or send us the original file through our file service and we will turn it round.

Garages and tuners The tools that cover this job Autotuner and the MagicMotorsport Flex both handle work like this. Buy or lease the tool and do it in your own workshop, or send us the read and we will build the file. Autotuner MagicMotorsport Flex Custom tuning file service What bench tuning means Compare the tuning tools →
Your car next

Put your registration in

Real power and torque for your exact engine, priced, from the same dyno data behind every article on this site.

The JF Automotive team
Meet the team

The team behind every job

Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.

Newsletter

Offers on parts and tuning, first

A short email now and then: new vehicle support, parts deals, open days. Nothing daily.