4.8/5 2,300+ reviews
4.8/5★★★★★2,300+ reviewsClosed · opens today 8am
Contact us
Searches the whole site: cars we tune, parts, case studies, the Help Centre, services and news. Try RS21JFAP0420Golf RMilltekAdBlue
4.8/5★★★★★2,300+ reviewsClosed · opens today 8am
Stage 1, 2 and 3 figures and the price for your exact engine
KlarnaPay with KlarnaSee our finance options→

Home › News

Updates · 19 November 2026

Delphi DCM3.5 Boot Read: Peugeot, Citroen, Fiat and Toyota Diesels

Autotuner adds Boot Normal Read for the Delphi DCM3.5 ECU on 2.0 HDi and JTDm diesels from Peugeot, Citroen, DS, Fiat and Toyota. Here is what is...

2 min readBy JF AutomotiveMaidstone, Kent

Autotuner has added Boot Normal Read support for the Delphi DCM3.5 ECU, announced on 18 November 2026. This is the diesel control unit found on a long list of Peugeot, Citroen, DS, Fiat and Toyota models running the 2.0 litre PSA diesel family, and it means our tools can now read the original software from these units in boot mode.

Which ECUs

The release covers the Delphi DCM3.5, which is built around an MPC5566 processor. It was introduced around 2009 and is tied to the 2.0 litre turbodiesel family at Euro 5 level. Autotuner lists the mode as Boot Normal Read (NR). The source does not label it beta.

Cars this opens up

The vehicles listed by Autotuner for the DCM3.5 are:

  • Peugeot 308, 508, 3008, RCZ and Expert
  • Citroen C4, C5, DS4, DS5, Jumpy and Jumper
  • Fiat Scudo
  • Toyota ProAce

Engines named are the 2.0 HDi, the 2.0 HDi HYbrid4 and the 2.0 JTDm. The HYbrid4 is used on the Peugeot 3008, Peugeot 508 and Citroen DS5. The article does not map every engine to every model, so we will confirm the exact fit for your vehicle before quoting.

What it means

For owners of these diesels, a bench read of the original file is the first step before a tuned file can be prepared. If you drive a 2.0 HDi Peugeot or Citroen, or a Scudo, Jumpy, Expert or ProAce van that does a lot of motorway work, ask about the file service and what a remap would mean for your particular vehicle and its condition. Use our tuning builder to see what is on offer for your car.

For dealers, this is another unit that the Autotuner covers in boot mode, so fewer vehicles need to be turned away or sent elsewhere. Boot work means taking the ECU off the vehicle, so check the vehicle is suitable and keep a full original backup before you write anything. Our file service can supply files for supported vehicles, and the Autotuner tuning tool page has the hardware details and how to order.

As always, support for reading an ECU is not the same as a guaranteed result on every vehicle. Variants, software versions and the condition of the engine all matter, so send us the details and we will tell you straight what is possible.

Garages and tuners Buy or lease the Autotuner Now £2,100ex VAT, next-day delivery This one is a bench job. You can do it in your own workshop with Autotuner, or send us the read and we will build the file. Custom tuning file service Finance and lease What bench tuning means File prices See the Autotuner →
Your car next

Put your registration in

Real power and torque for your exact engine, priced, from the same dyno data behind every article on this site.

The JF Automotive team
Meet the team

The team behind every job

Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.

Newsletter

Offers on parts and tuning, first

A short email now and then: new vehicle support, parts deals, open days. Nothing daily.