4.8/5 2,300+ reviews
4.8/5★★★★★2,300+ reviewsClosed · opens today 8am
Contact us
Searches the whole site: cars we tune, parts, case studies, the Help Centre, services and news. Try RS21JFAP0420Golf RMilltekAdBlue
4.8/5★★★★★2,300+ reviewsClosed · opens today 8am
Stage 1, 2 and 3 figures and the price for your exact engine
KlarnaPay with KlarnaSee our finance options→

Home › News

Updates · 19 November 2026

Korhex EMFI Unlock for Bosch MG1CS042 and MD1CS012: Stellantis, Hyundai, Kia

Flex 8.32.0.0 adds Korhex EMFI support for Bosch MG1CS042 and MD1CS012 TC298 ECUs on Stellantis, Hyundai and Kia models. See the vehicles and what it...

2 min readBy JF AutomotiveMaidstone, Kent

Magicmotorsport released Flex 8.32.0.0 on 17 November 2026 with Korhex support for two Bosch ECUs: the Stellantis MG1CS042 and the Hyundai and Kia MD1CS012, both built on the TC298 processor. The method is EMFI, electromagnetic fault injection, which unlocks the ECU without working directly on the circuit board.

Which ECUs

The two units are the Bosch MG1CS042 (TC298) used by Stellantis and the Bosch MD1CS012 (TC298) used by Hyundai and Kia. The Korhex working mode needs the Flex FLS0.20 licence or the Flex Full FLS0.5 configuration. We hold the Korhex hardware and the Flex licence level it requires. The source does not mark the protocol as beta.

Magicmotorsport lists read, write and checksum of the internal flash, read and write of the internal EEPROM, and a full backup. Quoted timings are roughly 30 seconds to connect, 2 minutes 30 seconds to read and 2 minutes to write.

Cars this opens up

The supplier shows these as example vehicles and points to its own tool for the full supported list:

  • Peugeot 308 (III) P5, 2021, 1.6 PureTech 16v PHEV 222HP
  • DS 9 (I), 2021, 1.6 Hybrid4 16v PHEV 355HP
  • Hyundai Staria (I) US4, 2021, 2.2 CRDi 16v 175HP
  • Kia Sorento (IV) MQ4, 2021, 2.2 CRDi 16v 200HP
  • Kia Tasman (I) TK, 2025, 2.2 CRDi 16v 207HP

We will check the exact vehicle against the supported list before agreeing any work.

What it means

For owners, these are recent plug-in hybrid and modern diesel models that until now were hard to read at all. Our tools now read and write these ECUs in Korhex mode, so ask us what a remap could mean for your car and whether your engine and software version are covered. You can also look at options in our tuning builder.

For dealers, an EMFI unlock with a short connection and write time keeps bench time low, and a full backup is taken as part of the process. Hybrid systems need care, so confirm the vehicle and keep the original file safe. Our file service can supply files for supported vehicles, and the Magicmotorsport Flex tuning tools page covers the hardware and licences.

Support for reading and writing an ECU does not guarantee a result on every vehicle, so send us the details and we will tell you what is realistic.

Garages and tuners Buy or lease the MagicMotorsport Flex From £1,600ex VAT, slave This one is a bench job. You can do it in your own workshop with the MagicMotorsport Flex, or send us the read and we will build the file. Custom tuning file service Finance and lease What bench tuning means File prices See the MagicMotorsport Flex →
Your car next

Put your registration in

Real power and torque for your exact engine, priced, from the same dyno data behind every article on this site.

The JF Automotive team
Meet the team

The team behind every job

Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.

Newsletter

Offers on parts and tuning, first

A short email now and then: new vehicle support, parts deals, open days. Nothing daily.