Buy Now. Pay With 
Learn More
Every car ›Kia ›Stonic ›2017 - 2019 ›1.6 CRDI
Diesel · 1.6 litre · Maidstone, KentKia Stonic 1.6 CRDI remap115 to 160 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.
A Stage 1 remap takes the Kia Stonic 1.6 CRDI from 115 to 160 bhp and from 260 to 325 Nm: 45 bhp and 65 Nm more, on standard hardware. Diesels gain most in torque, so the change shows as pull from low revs and less gear-changing under load, not just a higher peak figure. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.
Stage 1 on this engine
What the Kia Stonic 1.6 CRDI makes, standard and remapped
Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.
115→160
BHP · Power · +45
260→325
NM · Torque · +65
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
Stage 1 powerStage 1 torque (dashed)Standard
Drawn from the quoted peaks: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.
In the shop
Parts that fit the Kia Stonic 1.6 CRDI
Listed for this engine, fitted here or shipped. Anything from this list can be added to a Stage 2 build.
Same car, other engines
Kia Stonic 2017 - 2019: every engine we tune
All Kia Stonic engines (22) · Every Kia we tune (441) · All makes
Case studies
Kia Stonic cars we have tuned
Introducing Workshop 2: Expanding Our Reach for Exceptional Vehicle ServicingWe are thrilled to announce a major milestone at JF Automotive - the opening of Workshop 2! As a testament to our…Read the case study →
Poor Throttle Response? We Can Fix That – Kia Sedona 2.9 CRDiThere is so much going into making cars nowadays that manufacturers are certainly pushed to meet deadlines. This means unfortunately they are…Read the case study →Fixed price
Ask about your Kia Stonic 1.6 CRDI
Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.
Questions
Kia Stonic 1.6 CRDI remap questions
How much power does a Stage 1 remap add to a Kia Stonic 1.6 CRDI?
45 bhp and 65 Nm. Standard is 115 bhp / 260 Nm; Stage 1 is 160 bhp / 325 Nm. That is a 39% power gain and 25% more torque.
How do I get a price for a Kia Stonic 1.6 CRDI remap?
Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.
Is a Stage 1 remap safe for this engine?
Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.
Will a remap affect the DPF or AdBlue on a Kia Stonic 1.6 CRDI?
No. A Stage 1 remap keeps every emissions system as the factory fitted it. We do not remove or disable the DPF, EGR or AdBlue system as part of a remap.
How long does it take, and can it be reversed?
A Stage 1 remap is done in a single visit, usually the same day. The original software is stored and can be restored on request.
Meet the team
The team behind every job
Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.
Newsletter
Offers on parts and tuning, first
A short email now and then: new vehicle support, parts deals, open days. Nothing daily.