4.8 2,200+ reviews
4.8★★★★★2,200+ reviewsClosed · opens tomorrow 8am
Contact us
Searches the whole site: cars we tune, parts, case studies, the Help Centre, services and news. Try RS21JFAP0420Golf RMilltekAdBlue
4.8★★★★★2,200+ reviewsClosed · opens tomorrow 8am
Stage 1, 2 and 3 figures and the price for your exact engine
Klarna0% finance availableBuy now, pay later on tuning, servicing and parts→

Every car ›Toyota ›Hilux ›2006 - 2016 ›3.0 D4D

Diesel · 3.0 litre · Maidstone, Kent

Toyota Hilux 3.0 D4D remap125 to 155 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.

A Stage 1 remap takes the Toyota Hilux 3.0 D4D from 125 to 155 bhp and from 315 to 440 Nm: 30 bhp and 125 Nm more, on standard hardware. Diesels gain most in torque, so the change shows as pull from low revs and less gear-changing under load, not just a higher peak figure. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.

Stage 1 on this engine

What the Toyota Hilux 3.0 D4D makes, standard and remapped

Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.

125→155
BHP · Power · +30
315→440
NM · Torque · +125
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
1k 2k 3k 4k 5k 155 BHP 440 NM
Stage 1 powerStage 1 torque (dashed)Standard

Drawn from the quoted peaks: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.

In the shop

Parts that fit the Toyota Hilux 3.0 D4D

Listed for this engine, fitted here or shipped. Anything from this list can be added to a Stage 2 build.

Same car, other engines

Toyota Hilux 2006 - 2016: every engine we tune

All Toyota Hilux engines (36) · Every Toyota we tune (390) · All makes

Fixed price

Ask about your Toyota Hilux 3.0 D4D

Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.

Before you send, want our discount codes?
Occasional offers on tuning, parts and servicing. No spam, and you can unsubscribe in one click.

Got it. We will come back with the figures and a fixed price for your car.

If you know them, these help us get the quote right first time. Entirely optional.

Loading the form…

Questions

Toyota Hilux 3.0 D4D remap questions

How much power does a Stage 1 remap add to a Toyota Hilux 3.0 D4D?

30 bhp and 125 Nm. Standard is 125 bhp / 315 Nm; Stage 1 is 155 bhp / 440 Nm. That is a 24% power gain and 40% more torque.

How do I get a price for a Toyota Hilux 3.0 D4D remap?

Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.

Is a Stage 1 remap safe for this engine?

Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.

Will a remap affect the DPF or AdBlue on a Toyota Hilux 3.0 D4D?

No. A Stage 1 remap keeps every emissions system as the factory fitted it. We do not remove or disable the DPF, EGR or AdBlue system as part of a remap.

How long does it take, and can it be reversed?

A Stage 1 remap is around 2 hours, in a single visit. Add a dyno session and allow 4 to 5 hours. The original software is stored and can be restored on request.

The JF Automotive team
Meet the team

The team behind every job

Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.

Newsletter

Offers on parts and tuning, first

A short email now and then: new vehicle support, parts deals, open days. Nothing daily.