Every car
›Toyota
Make · Maidstone, Kent · Est. 2011
Toyota ECU remapping109 engines on file, each with its standard and Stage 1 figures.
Pick the model, then the engine, and you get what it makes as standard, what Stage 1 does to it and the parts that fit it. Or put the registration in and we find the engine for you.
109Engines
+24%Typical Stage 1 gain
+83 bhpBiggest gain
83 / 19Diesel / petrol
Models
Toyota models we tune
Biggest Stage 1 gains
Where Stage 1 makes the most difference on a Toyota
All makes
Toyota remapping
What a Toyota remap actually does
A remap rewrites the software in your car's engine ECU. On a modern turbocharged Toyota that is worth around +24% on power
and more again on torque, and on the strongest Toyota engines we hold
it is as much as +83 bhp. The peak figure is the part people quote,
but it is not the part you feel. What you notice on the road is torque arriving earlier, a sharper response to the
throttle and a much wider band of usable power, so the car pulls where you actually drive it instead of only at the top.
We hold data for 109 Toyota engines across 21 models,
83 diesel and 19 petrol, each with its
standard and Stage 1 figures. Put your registration in and we will show you yours rather than a range.
Every file is written for the specific engine and proven on our own Mustang AWD rolling road here in Maidstone.
We keep your original file, so the car can be put back to standard at any point.
Stage 1Software only
No hardware changes. The car keeps its standard turbo, exhaust, intercooler and catalyst, and stays road legal and MOT-ready.
This is what most Toyota owners have, and it is where the value is.
Stage 2Software plus hardware
A file written around parts you have fitted, usually a downpipe with a sports cat, an intercooler or an intake.
The hardware on its own does very little; the gain comes from mapping around it.
Stage 3The build
Turbo, injectors, fuelling and often internals, calibrated from scratch on the dyno. A project rather than an
appointment, and we will tell you honestly whether your engine is a sensible base for one.
How we do it
Reading and writing a Toyota ECU
The right tool for the unit
We run Alientech, Magic Motorsport, Flashtec and bFlash. Between them they cover the Bosch and Continental ECUs
used across the Toyota range, old and current. Which tool a car needs is decided by its
ECU, not its badge.
OBD or bench
Most cars are read and written through the diagnostic port with nothing removed. Some locked or later units have to
come out and go on the bench. We do bench work here rather than posting your ECU away, so it is the same visit.
Proven, not assumed
Our research and development bay holds a Mustang AWD linked dyno rated to 2000bhp. Book runs with your remap and you
leave with a printed before-and-after graph for your own car.
- Your original file is kept, so the car goes back to standard whenever you want
- Health check before we write anything, and a road test after
- Over 50,000 cars tuned since 2011, rated 4.8 from 2,200+ reviews
- Maidstone, Kent, with a mobile service and a trade file service for garages
Questions
Toyota tuning, asked and answered
How much power will a Toyota remap add?
It depends entirely on the engine, which is why we publish the figures per engine rather than a headline number. Across the 109 engines we hold, Stage 1 is typically worth around +24% on power, and as much as +83 bhp on the strongest. A modern turbo engine gains far more than a naturally aspirated one. Put your registration in and you will get the figures for your exact car.
Is remapping a Toyota safe for the engine?
It is when the limits are respected. We work inside the tolerances the engine was designed with, check the car over before we write anything and road test it afterwards. What damages engines is chasing a number past what the hardware can take, or a generic file written for a different specification of the same car.
Will a remap affect my Toyota warranty?
A main dealer can detect a remap and may decline an engine or drivetrain claim because of it. We keep your original file and can return the car to standard before a dealer visit, and we offer an optional engine warranty on Stage 1.
How long does it take and can it be undone?
Most cars are done in about two hours through the diagnostic port, or the same day if the ECU has to come out for a bench read. It is fully reversible: we hold your original file and can write it back.
Will it use more fuel?
Usually less on a steady motorway run, because the engine is working less hard to hold the same speed. Driven harder, it will use more. The gain in economy is real but it is not the reason to do it.
Do I need to book, and where are you?
We are in Maidstone, Kent, and we also run a mobile tuning service. Send us the registration and which stage you are interested in and we will come back with what your car needs, what it will make and a fixed price, usually the same working day.
Fixed priceAsk about your Toyota
Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.
Meet the team
The team behind every job
Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.
Newsletter
Offers on parts and tuning, first
A short email now and then: new vehicle support, parts deals, open days. Nothing daily.