Get this fitted at JFA From as little as FREE to get this part fitted. Contact us for fitting prices.
The JFA Touch Tune is a brilliant piece of equipment – and something we’ve worked to get right for our customers. This handheld unit has the potential to change the way you tune your car, and how you use it. Multiple maps, and the ability to tune and detune from home. This purchase includes the Touch Tune Device and a Stage 1 Remap for the specified vehicle. If you would like more options, please contact our team here.
Ford Ranger 2000 – 2011 2.5 TDCi – 143HP
143HP & 330Nm Torque
180HP & 420Nm Torque
It’s really very easy to use.
Now you can switch between your stock map and our Stage 1 file anytime, on the go!
The Touch tune has several different applications:
They want a quality tune on their vehicle, but live too far away from the nearest JFA dealer. We supply the home tuning unit, which allows them to send us the original file from their car. We can then tune this file, and send them back a modified file to upload to the car. Sure, this won’t offer as good a tune as a six hour session on the dyno, but it allows us full access to properly tune the ECU – thus offering more power than an off the shelf module, and better drivability. It’s a great mid-point, and they can also then remove the tune themselves at home if the car needs to go back in for any warranty work.
They want a nice safe reliable low power map for daily driving, but want the absolute maximum at the track. We get the car in, create the various maps and upload them to the Touch Tune. Customer can then drive to the track on 95 octane pump fuel with no risk of engine damage, then brim the car with 101 octane race fuel and wind the boost & timing up to make the best of it before going out on track. This sort of usage is also great for the guys running water methanol injection – we can develop a super hot methanol dependant tune, then offer a non-meth map too so they’ll see best performance possible without using any meth. This way the customer can drive the six hours to the track without using any methanol…upload the hot tune to the ECU, switch the meth setup on and go for the best quarter mile times! They can also keep the Touch Tune in the glovebox, so should they run out of meth they can simply upload the non-meth tune, and carry on driving as normal – the possibilities are endless.
They’ve had their car tuned on the dyno – but they’ve now fitted a decat pipe. The car doesn’t need re-tuning, but they need the software to remove the engine management light. Perhaps they’ve decided they want pops & bangs added to the map? Popcorn limiters? Antilag? We can make these additions to the map, then send them a modified file with these functions on it for them to install at home.
As many as five maps can be installed…so if we posted you out a Touch Tune, with a stock map & Stage 1 map on it and you then decided you wanted more power, you could bolt on all the Stage 2 bits & then just buy a Stage 2 tune from us. We can send you the file…and you can upload it at home. No waiting for booking appointments or anything – just plug it in and write the file to the car for Stage 2 power.
No problem – Simply send the Touch Tune back to us after its read the ECU software and we will load the requested tunes onto the device and ship it straight back, in fact we offer a same day turn around time on this so we will have you tuned in no time! Postage is Free also!
See our full range of JFA Performance tools, whether it's power or more response from your gearbox, we've got you covered!