4.8/5 2,300+ reviews
4.8/5★★★★★2,300+ reviewsClosed · opens tomorrow 8am
Contact us
Searches the whole site: cars we tune, parts, case studies, the Help Centre, services and news. Try RS21JFAP0420Golf RMilltekAdBlue
4.8/5★★★★★2,300+ reviewsClosed · opens tomorrow 8am
Stage 1, 2 and 3 figures and the price for your exact engine
KlarnaPay with KlarnaSee our finance options→

Home › News

Updates · 22 November 2026

KESS3 3.76 Bosch MG1CS011 Locked Boot Unlock: VW, Audi, Seat, Skoda

Alientech KESS3 3.76 adds a Boot unlock then bench route for locked Bosch MG1CS011 ECUs on 2021 on Audi, Cupra, Seat, Skoda and VW 1.0 and 1.5 TSI...

2 min readBy JF AutomotiveMaidstone, Kent

Alientech has released a KESS3 protocol update for Bosch MG1CS011 “Locked” ECUs, covering a run of Volkswagen Group petrol cars from 2021. It is a Boot Unlock procedure, followed by bench access once the unlock is done. The source does not call it BETA, and it needs the KESS3 Unlock Module.

Which ECUs

The ECU is the Bosch MG1CS011 in its “Locked” form. The route is a BOOT Unlock first, then BENCH after the unlock, so this is a workshop job with the ECU on the bench and not a plain in-car read. The article puts it against the 1.0 and 1.5 TSI/TFSI petrol engines on 2021 and later cars.

Because the unlock step needs the KESS3 Unlock Module, garages should check they hold it before promising a turnaround on one of these cars. As with any locked controller, a stable power supply during the bench stage is sensible, since an interrupted procedure on a modern ECU is an expensive mistake.

Cars this opens up

The supported list in the source is:

  • Audi: A1, A3, A4, A5, Q2, Q3
  • Cupra: Formentor
  • Seat: Arona, Ateca, Ibiza, Leon, Tarraco
  • Skoda: Fabia, Kamiq, Karoq, Octavia
  • Volkswagen: Golf, Golf Variant, Polo, T-Cross, Tiguan, T-Roc

These are mainstream, high-volume models, which is why a working route into a locked MG1CS011 matters: plenty of them are on the road and plenty are coming into workshops for servicing and upgrades.

What it means

Locked ECUs have kept a lot of newer small-capacity TSI cars out of reach for independent tuners. A defined unlock and bench procedure turns them into jobs that can be quoted and scheduled. For owners, that means a recent Golf, Leon or Formentor is no longer automatically ruled out. For dealers, it means a clearer process and a better turnaround once the unlock step is done.

Our tools read and write supported ECUs in line with each supplier’s release, and we will confirm the exact procedure for your car before booking it in. Gains vary by engine and fuel, so we only quote typical figures after looking at the specific car.

Owners can start with our tuning builder. Garages can see our file service and the Alientech tool page.

Garages and tuners Buy or lease the Alientech KESS 3 £2,590ex VAT, with OBD, bench and boot This one is a bench job. You can do it in your own workshop with the Alientech KESS 3, or send us the read and we will build the file. Custom tuning file service Finance and lease What bench tuning means File prices See the Alientech KESS 3 →
Your car next

Put your registration in

Real power and torque for your exact engine, priced, from the same dyno data behind every article on this site.

The JF Automotive team
Meet the team

The team behind every job

Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.

Newsletter

Offers on parts and tuning, first

A short email now and then: new vehicle support, parts deals, open days. Nothing daily.