4.8 2,200+ reviews

Every car Volkswagen Crafter 2011 - 2017 2.0 TDI

Diesel · 2.0 litre · Maidstone, Kent

Volkswagen Crafter 2.0 TDI remap115 to 185 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.

A Stage 1 remap takes the Volkswagen Crafter 2.0 TDI from 115 to 185 bhp and from 320 to 410 Nm: 70 bhp and 90 Nm more, on standard hardware. Diesels gain most in torque, so the change shows as pull from low revs and less gear-changing under load, not just a higher peak figure. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.

Stage 1 on this engine

What the Volkswagen Crafter 2.0 TDI makes, standard and remapped

Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.

115185
BHP · Power · +70
320410
NM · Torque · +90
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
1k 2k 3k 4k 5k 185 BHP 410 NM
Stage 1 powerStage 1 torque (dashed)Standard

Drawn from the quoted peaks: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.

In the shop

Parts that fit the Volkswagen Crafter 2.0 TDI

Listed for this engine, fitted here or shipped. Anything from this list can be added to a Stage 2 build.

Fixed price

Ask about your Volkswagen Crafter 2.0 TDI

Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.

Before you send, want our discount codes?
Occasional offers on tuning, parts and servicing. No spam, and you can unsubscribe in one click.

Got it. We will come back with the figures and a fixed price for your car.

If you know them, these help us get the quote right first time. Entirely optional.

Loading the form…

Questions

Volkswagen Crafter 2.0 TDI remap questions

How much power does a Stage 1 remap add to a Volkswagen Crafter 2.0 TDI?

70 bhp and 90 Nm. Standard is 115 bhp / 320 Nm; Stage 1 is 185 bhp / 410 Nm. That is a 61% power gain and 28% more torque.

How do I get a price for a Volkswagen Crafter 2.0 TDI remap?

Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.

Is a Stage 1 remap safe for this engine?

Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.

Will a remap affect the DPF or AdBlue on a Volkswagen Crafter 2.0 TDI?

No. A Stage 1 remap keeps every emissions system as the factory fitted it. We do not remove or disable the DPF, EGR or AdBlue system as part of a remap.

How long does it take, and can it be reversed?

A Stage 1 remap is done in a single visit, usually the same day. The original software is stored and can be restored on request.

The JF Automotive team
The people

Meet the team who'll work on your car

Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.

Newsletter

Offers on parts and tuning, first

A short email now and then: new vehicle support, parts deals, open days. Nothing daily.