Buy Now. Pay With 
Learn More
Every car ›Subaru ›BRZ ›2012 - 2016 ›2.0i
Petrol · 2.0 litre · Maidstone, KentSubaru BRZ 2.0i remap200 to 215 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.
A Stage 1 remap takes the Subaru BRZ 2.0i from 200 to 215 bhp and from 205 to 220 Nm: 15 bhp and 15 Nm more, on standard hardware. On a turbocharged petrol the gain comes from boost, fuelling and ignition timing recalibrated within the limits of the standard turbo and injectors. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.
Stage 1 on this engine
What the Subaru BRZ 2.0i makes, standard and remapped
Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.
200→215
BHP · Power · +15
205→220
NM · Torque · +15
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
Stage 1 powerStage 1 torque (dashed)Standard
Drawn from the quoted peaks: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.
In the shop
Parts that fit the Subaru BRZ 2.0i
Listed for this engine, fitted here or shipped. Anything from this list can be added to a Stage 2 build.
Milltek Over-Pipe for Subaru BRZ 2.0i – 200HP
£183.86
Milltek Exhausts
Milltek Primary Cat Back Exhaust System for Subaru BRZ 2.0i – 200HP
£1,034.82
Milltek Exhausts
Milltek Secondary Cat Back Exhaust System for Subaru BRZ 2.0i – 200HP
£642.09
Milltek Exhausts
Scorpion Up-Pipe For Subaru BRZ – 2.0i – 200HP / 2012 – 2016
£118.97
Scorpion Exhausts
Scorpion Secondary Catalyst Replacement For Subaru BRZ – 2.0i – 200HP / 2012 – 2016
£197.29
Scorpion Exhausts
Scorpion Ascari Upgrade Kit For Subaru BRZ – 2.0i – 200HP / 2012 – 2016
£263.34
Scorpion Exhausts
Same car, other engines
Subaru BRZ 2012 - 2016: every engine we tune
All Subaru BRZ engines (44) · Every Subaru we tune (134) · All makes
Fixed price
Ask about your Subaru BRZ 2.0i
Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.
Questions
Subaru BRZ 2.0i remap questions
How much power does a Stage 1 remap add to a Subaru BRZ 2.0i?
15 bhp and 15 Nm. Standard is 200 bhp / 205 Nm; Stage 1 is 215 bhp / 220 Nm. That is a 8% power gain and 7% more torque.
How do I get a price for a Subaru BRZ 2.0i remap?
Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.
Is a Stage 1 remap safe for this engine?
Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.
Does a remap affect the warranty on a Subaru BRZ 2.0i?
A manufacturer can decline a warranty claim on a part they can show was affected by the remap. We tell you plainly what that means for your car and your warranty position before anything is done.
How long does it take, and can it be reversed?
A Stage 1 remap is done in a single visit, usually the same day. The original software is stored and can be restored on request.
Meet the team
The team behind every job
Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.
Newsletter
Offers on parts and tuning, first
A short email now and then: new vehicle support, parts deals, open days. Nothing daily.