Buy Now. Pay With 
Learn More
Every car ›Peugeot ›3008 ›2014 - 2016 ›2.0 HDi Hybrid
Hybrid · 2.0 litre · Maidstone, KentPeugeot 3008 2.0 HDi Hybrid remap200 to 230 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.
A Stage 1 remap takes the Peugeot 3008 2.0 HDi Hybrid from 200 to 230 bhp and from 450 to 500 Nm: 30 bhp and 50 Nm more, on standard hardware. On a plug-in hybrid the remap works on the combustion engine only; the electric motor and battery are untouched, so EV range and charging are unchanged. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.
Stage 1 on this engine
What the Peugeot 3008 2.0 HDi Hybrid makes, standard and remapped
Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.
200→230
BHP · Power · +30
450→500
NM · Torque · +50
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
Stage 1 powerStage 1 torque (dashed)Standard
Drawn from the quoted peaks: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.
In the shop
Parts that fit the Peugeot 3008 2.0 HDi Hybrid
Listed for this engine, fitted here or shipped. Anything from this list can be added to a Stage 2 build.
Same car, other engines
Peugeot 3008 2014 - 2016: every engine we tune
1.6 e-HDi - 115HP115 → 140 bhp
1.6 THP - 155HP155 → 190 bhp
1.6 VTI - 120HP120 → 135 bhp
2.0 BlueHDi - 150HP150 → 200 bhp
2.0 HDi - 150HP150 → 190 bhp
2.0 HDi - 163HP163 → 190 bhp
All Peugeot 3008 engines (76) · Every Peugeot we tune (1027) · All makes
Fixed price
Ask about your Peugeot 3008 2.0 HDi Hybrid
Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.
Questions
Peugeot 3008 2.0 HDi Hybrid remap questions
How much power does a Stage 1 remap add to a Peugeot 3008 2.0 HDi Hybrid?
30 bhp and 50 Nm. Standard is 200 bhp / 450 Nm; Stage 1 is 230 bhp / 500 Nm. That is a 15% power gain and 11% more torque.
How do I get a price for a Peugeot 3008 2.0 HDi Hybrid remap?
Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.
Is a Stage 1 remap safe for this engine?
Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.
Does remapping a Peugeot 3008 2.0 HDi Hybrid affect the battery or electric range?
No. The remap changes the petrol engine calibration only. The high-voltage battery, motor and charging are not touched, and EV range is unchanged.
How long does it take, and can it be reversed?
A Stage 1 remap is done in a single visit, usually the same day. The original software is stored and can be restored on request.
The people
Meet the team who'll work on your car
Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.
Newsletter
Offers on parts and tuning, first
A short email now and then: new vehicle support, parts deals, open days. Nothing daily.