Buy Now. Pay With 
Learn More
Every car ›Mercedes ›Maybach ›2016 - ›3.0 V6 Bi-Turbo
Petrol · 3.0 litre · Maidstone, KentMercedes Maybach 3.0 V6 Bi-Turbo remap333 to 375 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.
A Stage 1 remap takes the Mercedes Maybach 3.0 V6 Bi-Turbo from 333 to 375 bhp and from 480 to 560 Nm: 42 bhp and 80 Nm more, on standard hardware. On a turbocharged petrol the gain comes from boost, fuelling and ignition timing recalibrated within the limits of the standard turbo and injectors. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.
Stage 1 on this engine
What the Mercedes Maybach 3.0 V6 Bi-Turbo makes, standard and remapped
Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.
333→375
BHP · Power · +42
480→560
NM · Torque · +80
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
Stage 1 powerStage 1 torque (dashed)Standard
Drawn from the quoted peaks: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.
In the shop
Parts that fit the Mercedes Maybach 3.0 V6 Bi-Turbo
Listed for this engine, fitted here or shipped. Anything from this list can be added to a Stage 2 build.
Same car, other engines
Mercedes Maybach 2016 -: every engine we tune
All Mercedes Maybach engines (9) · Every Mercedes we tune (3577) · All makes
Case studies
Mercedes Maybach cars we have tuned
Mercedes Sprinter Tuning and ECU RemappingA Sprinter is a working vehicle, so the reason to remap one is rarely peak power. It is how the van pulls…Read the case study →
Mercedes MD1 MG1 ECU UnlockMERCEDES-BENZ MD1/MG1 ECU UNLOCK At JF Automotive, we’re thrilled to announce that we can now remap 2021+ engines on select Mercedes-Benz models,…Read the case study →
Mercedes AMG GT 2017+MERCEDES AMG GT TUNING (2017 - Present)Through our expert upgrades and meticulous calibrations, we aim to elevate your Mercedes AMG GT to…Read the case study →Fixed price
Ask about your Mercedes Maybach 3.0 V6 Bi-Turbo
Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.
Questions
Mercedes Maybach 3.0 V6 Bi-Turbo remap questions
How much power does a Stage 1 remap add to a Mercedes Maybach 3.0 V6 Bi-Turbo?
42 bhp and 80 Nm. Standard is 333 bhp / 480 Nm; Stage 1 is 375 bhp / 560 Nm. That is a 13% power gain and 17% more torque.
How do I get a price for a Mercedes Maybach 3.0 V6 Bi-Turbo remap?
Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.
Is a Stage 1 remap safe for this engine?
Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.
Does a remap affect the warranty on a Mercedes Maybach 3.0 V6 Bi-Turbo?
A manufacturer can decline a warranty claim on a part they can show was affected by the remap. We tell you plainly what that means for your car and your warranty position before anything is done.
How long does it take, and can it be reversed?
A Stage 1 remap is done in a single visit, usually the same day. The original software is stored and can be restored on request.
Meet the team
The team behind every job
Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.
Newsletter
Offers on parts and tuning, first
A short email now and then: new vehicle support, parts deals, open days. Nothing daily.