Buy Now. Pay With 
Learn More
Every car ›Audi ›Q7 ›4L (2010 - 2015) ›3.0 TDI CR
Diesel · 3.0 litre · Maidstone, KentAudi Q7 3.0 TDI CR remap218 to 320 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.
A Stage 1 remap takes the Audi Q7 3.0 TDI CR from 218 to 320 bhp and from 500 to 680 Nm: 102 bhp and 180 Nm more, on standard hardware. Diesels gain most in torque, so the change shows as pull from low revs and less gear-changing under load, not just a higher peak figure. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.
Stage 1 on this engine
What the Audi Q7 3.0 TDI CR makes, standard and remapped
Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.
218→320
BHP · Power · +102
500→680
NM · Torque · +180
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
Stage 1 powerStage 1 torque (dashed)Standard
Drawn from the quoted peaks: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.
In the shop
Parts that fit the Audi Q7 3.0 TDI CR
Listed for this engine, fitted here or shipped. Anything from this list can be added to a Stage 2 build.
Same car, other engines
Audi Q7 4L (2010 - 2015): every engine we tune
3.0 TDI CR - 204HP204 → 295 bhp
3.0 TDI CR - 211HP211 → 290 bhp
3.0 TDI CR - 240HP240 → 290 bhp
3.0TDI CR - 245HP245 → 290 bhp
3.0TFSI - 272HP272 → 400 bhp
3.0TFSI - 333HP333 → 400 bhp
4.2 TDI CR - 326HP326 → 375 bhp
4.2 TDI CR - 340HP340 → 390 bhp
All Audi Q7 engines (140) · Every Audi we tune (5098) · All makes
Case studies
Audi Q7 cars we have tuned
EV Servicing, Repairs and TuningWhat we do for electric cars Four things, and we are straight about which is which. We service and MOT electric cars,…Read the case study →
Audi S3, S4 and S5 Tuning and ECU RemappingWith the S models, the badge on the back tells you much less than the engine under the bonnet. An S4 might…Read the case study →
Audi RS6 & RS7 C7 2011-2018AUDI RS6 & RS7 TUNING C7 (2010 - 2018) The Audi RS6 & RS7 C7 models are some of the most popular…Read the case study →Fixed price
Ask about your Audi Q7 3.0 TDI CR
Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.
Questions
Audi Q7 3.0 TDI CR remap questions
How much power does a Stage 1 remap add to a Audi Q7 3.0 TDI CR?
102 bhp and 180 Nm. Standard is 218 bhp / 500 Nm; Stage 1 is 320 bhp / 680 Nm. That is a 47% power gain and 36% more torque.
How do I get a price for a Audi Q7 3.0 TDI CR remap?
Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.
Is a Stage 1 remap safe for this engine?
Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.
Will a remap affect the DPF or AdBlue on a Audi Q7 3.0 TDI CR?
No. A Stage 1 remap keeps every emissions system as the factory fitted it. We do not remove or disable the DPF, EGR or AdBlue system as part of a remap.
How long does it take, and can it be reversed?
A Stage 1 remap is done in a single visit, usually the same day. The original software is stored and can be restored on request.
Meet the team
The team behind every job
Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.
Newsletter
Offers on parts and tuning, first
A short email now and then: new vehicle support, parts deals, open days. Nothing daily.