4.8 2,200+ reviews

Every car Kia Sorento 2010 - 2015 2.2 CRDI

Diesel · 2.2 litre · Maidstone, Kent

Kia Sorento 2.2 CRDI remap197 to 230 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.

A Stage 1 remap takes the Kia Sorento 2.2 CRDI from 197 to 230 bhp and from 430 to 500 Nm: 33 bhp and 70 Nm more, on standard hardware. Diesels gain most in torque, so the change shows as pull from low revs and less gear-changing under load, not just a higher peak figure. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.

Stage 1 on this engine

What the Kia Sorento 2.2 CRDI makes, standard and remapped

Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.

197230
BHP · Power · +33
430500
NM · Torque · +70
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
1k 2k 3k 4k 5k 230 BHP 500 NM
Stage 1 powerStage 1 torque (dashed)Standard

Drawn from the quoted peaks and this engine’s peak rpm from our vehicle data: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.

Same car, other engines

Kia Sorento 2010 - 2015: every engine we tune

All Kia Sorento engines (44) · Every Kia we tune (441) · All makes

Fixed price

Ask about your Kia Sorento 2.2 CRDI

Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.

Before you send, want our discount codes?
Occasional offers on tuning, parts and servicing. No spam, and you can unsubscribe in one click.

Got it. We will come back with the figures and a fixed price for your car.

If you know them, these help us get the quote right first time. Entirely optional.

Loading the form…

Questions

Kia Sorento 2.2 CRDI remap questions

How much power does a Stage 1 remap add to a Kia Sorento 2.2 CRDI?

33 bhp and 70 Nm. Standard is 197 bhp / 430 Nm; Stage 1 is 230 bhp / 500 Nm. That is a 17% power gain and 16% more torque.

How do I get a price for a Kia Sorento 2.2 CRDI remap?

Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.

Is a Stage 1 remap safe for this engine?

Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.

Will a remap affect the DPF or AdBlue on a Kia Sorento 2.2 CRDI?

No. A Stage 1 remap keeps every emissions system as the factory fitted it. We do not remove or disable the DPF, EGR or AdBlue system as part of a remap.

How long does it take, and can it be reversed?

A Stage 1 remap is done in a single visit, usually the same day. The original software is stored and can be restored on request.

The JF Automotive team
Meet the team

The team behind every job

Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.

Newsletter

Offers on parts and tuning, first

A short email now and then: new vehicle support, parts deals, open days. Nothing daily.