Buy Now. Pay With 
Learn More
Every car ›Kia ›Magentis ›All ›2.0 CRDI
Diesel · 2.0 litre · Maidstone, KentKia Magentis 2.0 CRDI remap140 to 170 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.
A Stage 1 remap takes the Kia Magentis 2.0 CRDI from 140 to 170 bhp and from 305 to 371 Nm: 30 bhp and 66 Nm more, on standard hardware. Diesels gain most in torque, so the change shows as pull from low revs and less gear-changing under load, not just a higher peak figure. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.
Stage 1 on this engine
What the Kia Magentis 2.0 CRDI makes, standard and remapped
Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.
140→170
BHP · Power · +30
305→371
NM · Torque · +66
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
Stage 1 powerStage 1 torque (dashed)Standard
Drawn from the quoted peaks: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.
In the shop
Parts that fit the Kia Magentis 2.0 CRDI
Listed for this engine, fitted here or shipped. Anything from this list can be added to a Stage 2 build.
Same car, other engines
Kia Magentis All: every engine we tune
All Kia Magentis engines (5) · Every Kia we tune (441) · All makes
Case studies
Kia Magentis cars we have tuned
Introducing Workshop 2: Expanding Our Reach for Exceptional Vehicle ServicingWe are thrilled to announce a major milestone at JF Automotive – the opening of Workshop 2! As a testament to our…Read the case study →
Poor Throttle Response? We Can Fix That – Kia Sedona 2.9 CRDiThere is so much going into making cars nowadays that manufacturers are certainly pushed to meet deadlines. This means unfortunately they are…Read the case study →Fixed price
Ask about your Kia Magentis 2.0 CRDI
Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.
Questions
Kia Magentis 2.0 CRDI remap questions
How much power does a Stage 1 remap add to a Kia Magentis 2.0 CRDI?
30 bhp and 66 Nm. Standard is 140 bhp / 305 Nm; Stage 1 is 170 bhp / 371 Nm. That is a 21% power gain and 22% more torque.
How do I get a price for a Kia Magentis 2.0 CRDI remap?
Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.
Is a Stage 1 remap safe for this engine?
Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.
Will a remap affect the DPF or AdBlue on a Kia Magentis 2.0 CRDI?
No. A Stage 1 remap keeps every emissions system as the factory fitted it. We do not remove or disable the DPF, EGR or AdBlue system as part of a remap.
How long does it take, and can it be reversed?
A Stage 1 remap is done in a single visit, usually the same day. The original software is stored and can be restored on request.
The people
Meet the team who'll work on your car
Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.
Newsletter
Offers on parts and tuning, first
A short email now and then: new vehicle support, parts deals, open days. Nothing daily.