4.8 2,200+ reviews
4.8★★★★★2,200+ reviewsClosed · opens today 8am
Contact us
Searches the whole site: cars we tune, parts, case studies, the Help Centre, services and news. Try RS21JFAP0420Golf RMilltekAdBlue
4.8★★★★★2,200+ reviewsClosed · opens today 8am
Stage 1, 2 and 3 figures and the price for your exact engine
Klarna0% finance availableBuy now, pay later on tuning, servicing and parts

Every car Iveco ECODaily All 3.0 CR Twin Turbo

Diesel · 3.0 litre · Maidstone, Kent

Iveco ECODaily 3.0 CR Twin Turbo remap205 to 250 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.

A Stage 1 remap takes the Iveco ECODaily 3.0 CR Twin Turbo from 205 to 250 bhp and from 470 to 560 Nm: 45 bhp and 90 Nm more, on standard hardware. Diesels gain most in torque, so the change shows as pull from low revs and less gear-changing under load, not just a higher peak figure. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.

Stage 1 on this engine

What the Iveco ECODaily 3.0 CR Twin Turbo makes, standard and remapped

Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.

205250
BHP · Power · +45
470560
NM · Torque · +90
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
1k 2k 3k 4k 5k 250 BHP 560 NM
Stage 1 powerStage 1 torque (dashed)Standard

Drawn from the quoted peaks: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.

In the shop

Parts that fit the Iveco ECODaily 3.0 CR Twin Turbo

Listed for this engine, fitted here or shipped. Anything from this list can be added to a Stage 2 build.

Fixed price

Ask about your Iveco ECODaily 3.0 CR Twin Turbo

Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.

Before you send, want our discount codes?
Occasional offers on tuning, parts and servicing. No spam, and you can unsubscribe in one click.

Got it. We will come back with the figures and a fixed price for your car.

If you know them, these help us get the quote right first time. Entirely optional.

Loading the form…

Questions

Iveco ECODaily 3.0 CR Twin Turbo remap questions

How much power does a Stage 1 remap add to a Iveco ECODaily 3.0 CR Twin Turbo?

45 bhp and 90 Nm. Standard is 205 bhp / 470 Nm; Stage 1 is 250 bhp / 560 Nm. That is a 22% power gain and 19% more torque.

How do I get a price for a Iveco ECODaily 3.0 CR Twin Turbo remap?

Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.

Is a Stage 1 remap safe for this engine?

Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.

Will a remap affect the DPF or AdBlue on a Iveco ECODaily 3.0 CR Twin Turbo?

No. A Stage 1 remap keeps every emissions system as the factory fitted it. We do not remove or disable the DPF, EGR or AdBlue system as part of a remap.

How long does it take, and can it be reversed?

A Stage 1 remap is around 2 hours, in a single visit. Add a dyno session and allow 4 to 5 hours. The original software is stored and can be restored on request.

The JF Automotive team
Meet the team

The team behind every job

Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.

Newsletter

Offers on parts and tuning, first

A short email now and then: new vehicle support, parts deals, open days. Nothing daily.