Buy Now. Pay With 
Learn More
Every car ›Volkswagen ›Amarok ›2016 - 2019 ›3.0 V6 TDI
Diesel · 3.0 litre · Maidstone, KentVolkswagen Amarok 3.0 V6 TDI remap258 to 320 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.
A Stage 1 remap takes the Volkswagen Amarok 3.0 V6 TDI from 258 to 320 bhp and from 580 to 690 Nm: 62 bhp and 110 Nm more, on standard hardware. Diesels gain most in torque, so the change shows as pull from low revs and less gear-changing under load, not just a higher peak figure. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.
Stage 1 on this engine
What the Volkswagen Amarok 3.0 V6 TDI makes, standard and remapped
Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.
258→320
BHP · Power · +62
580→690
NM · Torque · +110
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
Stage 1 powerStage 1 torque (dashed)Standard
Drawn from the quoted peaks: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.
In the shop
Parts that fit the Volkswagen Amarok 3.0 V6 TDI
Listed for this engine, fitted here or shipped. Anything from this list can be added to a Stage 2 build.
Forge Motorsport Brake Kit 380mm for Volkswagen Amarok 2016 – 2019 3.0 V6 TDI – 258HP
£2,370.94
Forge MotorSport Brakes
Forge Motorsport Replacement Front 6 Caliper Piston Kit for Volkswagen Amarok 2016 – 2019 3.0 V6 TDI – 258HP
£103.20
Forge MotorSport Brakes
Auto Gearbox Tuner for Volkswagen Amarok 2016 – 2019 3.0 V6 TDI – 258HP
£262.50
Elite Flash Gearbox Tuning
Wagner Tuning Competition Intercooler Kit for Volkswagen Amarok 2016 – 2019 3.0 V6 TDI – 258HP
£650.00
Wagner Tuning Intercooler
Touch Tune – Remote Tuner for Volkswagen Amarok 3.0 V6 TDI – 258HP
£429.17
JFA Touch Tune Home Tuning
Same car, other engines
Volkswagen Amarok 2016 - 2019: every engine we tune
2.0 TDI - 122HP122 → 180 bhp
3.0 V6 TDI - 163HP163 → 310 bhp
3.0 V6 TDI - 204HP204 → 320 bhp
3.0 V6 TDI - 224HP224 → 320 bhp
All Volkswagen Amarok engines (60) · Every Volkswagen we tune (4256) · All makes
Case studies
Volkswagen Amarok cars we have tuned
VW Transporter Tuning and ECU RemappingThe Transporter splits neatly into two conversations: everything up to the T6.1, which is a Volkswagen through and through, and the new…Read the case study →
VAG DSG – S-Tronic TuningDSG / S-TRONIC GEARBOXTUNING GET MY PRICE Higher Torque LimitMost automatic gearboxes have a set torque limit within the software, meaning tuned…Read the case study →
Introducing Workshop 2: Expanding Our Reach for Exceptional Vehicle ServicingWe are thrilled to announce a major milestone at JF Automotive – the opening of Workshop 2! As a testament to our…Read the case study →Fixed price
Ask about your Volkswagen Amarok 3.0 V6 TDI
Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.
Questions
Volkswagen Amarok 3.0 V6 TDI remap questions
How much power does a Stage 1 remap add to a Volkswagen Amarok 3.0 V6 TDI?
62 bhp and 110 Nm. Standard is 258 bhp / 580 Nm; Stage 1 is 320 bhp / 690 Nm. That is a 24% power gain and 19% more torque.
How do I get a price for a Volkswagen Amarok 3.0 V6 TDI remap?
Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.
Is a Stage 1 remap safe for this engine?
Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.
Will a remap affect the DPF or AdBlue on a Volkswagen Amarok 3.0 V6 TDI?
No. A Stage 1 remap keeps every emissions system as the factory fitted it. We do not remove or disable the DPF, EGR or AdBlue system as part of a remap.
How long does it take, and can it be reversed?
A Stage 1 remap is done in a single visit, usually the same day. The original software is stored and can be restored on request.
The people
Meet the team who'll work on your car
Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.
Newsletter
Offers on parts and tuning, first
A short email now and then: new vehicle support, parts deals, open days. Nothing daily.