Buy Now. Pay With 
Learn More
Every car ›Seat ›Ibiza ›6J (2008 - 2015) ›2.0 TDI CR
Diesel · 2.0 litre · Maidstone, KentSeat Ibiza 2.0 TDI CR remap140 to 190 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.
A Stage 1 remap takes the Seat Ibiza 2.0 TDI CR from 140 to 190 bhp and from 350 to 400 Nm: 50 bhp and 50 Nm more, on standard hardware. Diesels gain most in torque, so the change shows as pull from low revs and less gear-changing under load, not just a higher peak figure. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.
Stage 1 on this engine
What the Seat Ibiza 2.0 TDI CR makes, standard and remapped
Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.
140→190
BHP · Power · +50
350→400
NM · Torque · +50
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
Stage 1 powerStage 1 torque (dashed)Standard
Drawn from the quoted peaks: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.
In the shop
Parts that fit the Seat Ibiza 2.0 TDI CR
Listed for this engine, fitted here or shipped. Anything from this list can be added to a Stage 2 build.
Eibach Performance Springs for Seat Ibiza 2.0 TDI CR – 140HP – 6J (2008 – 2015)
£194.43
Eibach Suspension
Eibach Anti-Roll-Kit for Seat Ibiza 2.0 TDI CR – 140HP – 6J (2008 – 2015)
£230.94
Eibach Suspension
Eibach Coil-Over Suspension Systems for Seat Ibiza 2.0 TDI CR – 140HP – 6J (2008 – 2015)
£1,017.31
Eibach Suspension
Auto Gearbox Tuner for Seat Ibiza 6J (2008 – 2015) 2.0 TDI CR – 140HP
£236.25
Elite Flash Gearbox Tuning
Touch Tune – Remote Tuner for Seat Ibiza 2.0 TDI CR – 140HP
£345.83
JFA Touch Tune Home Tuning
Same car, other engines
Seat Ibiza 6J (2008 - 2015): every engine we tune
1.2 TDI - 75HP75 → 105 bhp
1.2 TSI - 105HP105 → 130 bhp
1.2 TSI - 86HP86 → 130 bhp
1.4 TDI - 80HP80 → 105 bhp
1.4 TSI - 140HP140 → 170 bhp
1.4 TSI - 150HP150 → 200 bhp
1.4 TSI - 180HP180 → 210 bhp
1.6 TDI CR - 105HP105 → 135 bhp
All Seat Ibiza engines (282) · Every Seat we tune (1573) · All makes
Case studies
Seat Ibiza cars we have tuned
VAG DSG – S-Tronic TuningDSG / S-TRONIC GEARBOXTUNING GET MY PRICE Higher Torque LimitMost automatic gearboxes have a set torque limit within the software, meaning tuned…Read the case study →
Introducing Workshop 2: Expanding Our Reach for Exceptional Vehicle ServicingWe are thrilled to announce a major milestone at JF Automotive – the opening of Workshop 2! As a testament to our…Read the case study →
Budget builds – VAG 2.0TFSIThe VAG 2.0TFSi engines launched around 2005, and very quickly proved themselves a brilliant candidate for tuning. With these cars getting older…Read the case study →Fixed price
Ask about your Seat Ibiza 2.0 TDI CR
Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.
Questions
Seat Ibiza 2.0 TDI CR remap questions
How much power does a Stage 1 remap add to a Seat Ibiza 2.0 TDI CR?
50 bhp and 50 Nm. Standard is 140 bhp / 350 Nm; Stage 1 is 190 bhp / 400 Nm. That is a 36% power gain and 14% more torque.
How do I get a price for a Seat Ibiza 2.0 TDI CR remap?
Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.
Is a Stage 1 remap safe for this engine?
Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.
Will a remap affect the DPF or AdBlue on a Seat Ibiza 2.0 TDI CR?
No. A Stage 1 remap keeps every emissions system as the factory fitted it. We do not remove or disable the DPF, EGR or AdBlue system as part of a remap.
How long does it take, and can it be reversed?
A Stage 1 remap is done in a single visit, usually the same day. The original software is stored and can be restored on request.
Meet the team
The team behind every job
Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.
Newsletter
Offers on parts and tuning, first
A short email now and then: new vehicle support, parts deals, open days. Nothing daily.