Buy Now. Pay With 
Learn More
Every car ›Peugeot ›Expert/Traveller ›2016 - 2019 ›1.6 HDi
Diesel · 1.6 litre · Maidstone, KentPeugeot Expert/Traveller 1.6 HDi remap95 to 130 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.
A Stage 1 remap takes the Peugeot Expert/Traveller 1.6 HDi from 95 to 130 bhp and from 210 to 320 Nm: 35 bhp and 110 Nm more, on standard hardware. Diesels gain most in torque, so the change shows as pull from low revs and less gear-changing under load, not just a higher peak figure. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.
Stage 1 on this engine
What the Peugeot Expert/Traveller 1.6 HDi makes, standard and remapped
Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.
95→130
BHP · Power · +35
210→320
NM · Torque · +110
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
Stage 1 powerStage 1 torque (dashed)Standard
Drawn from the quoted peaks and this engine’s peak rpm from our vehicle data: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.
In the shop
Parts that fit the Peugeot Expert/Traveller 1.6 HDi
Listed for this engine, fitted here or shipped. Anything from this list can be added to a Stage 2 build.
Same car, other engines
Peugeot Expert/Traveller 2016 - 2019: every engine we tune
1.6 HDi - 115HP115 → 140 bhp
2.0 BlueHDi - 120HP120 → 190 bhp
2.0 BlueHDi - 180HP180 → 205 bhp
2.0 HDi - 150HP150 → 205 bhp
All Peugeot Expert/Traveller engines (53) · Every Peugeot we tune (1027) · All makes
Fixed price
Ask about your Peugeot Expert/Traveller 1.6 HDi
Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.
Questions
Peugeot Expert/Traveller 1.6 HDi remap questions
How much power does a Stage 1 remap add to a Peugeot Expert/Traveller 1.6 HDi?
35 bhp and 110 Nm. Standard is 95 bhp / 210 Nm; Stage 1 is 130 bhp / 320 Nm. That is a 37% power gain and 52% more torque.
How do I get a price for a Peugeot Expert/Traveller 1.6 HDi remap?
Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.
Is a Stage 1 remap safe for this engine?
Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.
Will a remap affect the DPF or AdBlue on a Peugeot Expert/Traveller 1.6 HDi?
No. A Stage 1 remap keeps every emissions system as the factory fitted it. We do not remove or disable the DPF, EGR or AdBlue system as part of a remap.
How long does it take, and can it be reversed?
A Stage 1 remap is done in a single visit, usually the same day. The original software is stored and can be restored on request.
Meet the team
The team behind every job
Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.
Newsletter
Offers on parts and tuning, first
A short email now and then: new vehicle support, parts deals, open days. Nothing daily.