Buy Now. Pay With 
Learn More
Every car ›Mazda ›Mazda 3 ›2003 - 2009 ›2.0 MZ-CD
Diesel · 2.0 litre · Maidstone, KentMazda Mazda 3 2.0 MZ-CD remap143 to 170 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.
A Stage 1 remap takes the Mazda Mazda 3 2.0 MZ-CD from 143 to 170 bhp and from 360 to 410 Nm: 27 bhp and 50 Nm more, on standard hardware. Diesels gain most in torque, so the change shows as pull from low revs and less gear-changing under load, not just a higher peak figure. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.
Stage 1 on this engine
What the Mazda Mazda 3 2.0 MZ-CD makes, standard and remapped
Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.
143→170
BHP · Power · +27
360→410
NM · Torque · +50
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
Stage 1 powerStage 1 torque (dashed)Standard
Drawn from the quoted peaks: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.
In the shop
Parts that fit the Mazda Mazda 3 2.0 MZ-CD
Listed for this engine, fitted here or shipped. Anything from this list can be added to a Stage 2 build.
Eibach Performance Springs for Mazda Mazda 3 2.0 MZ-CD – 143HP – 2003 – 2009
£225.31
Eibach Suspension
Auto Gearbox Tuner for Mazda Mazda 3 2003 – 2009 2.0 MZ-CD – 143HP
£262.50
Elite Flash Gearbox Tuning
Touch Tune – Remote Tuner for Mazda Mazda 3 2.0 MZ-CD – 143HP
£387.50
JFA Touch Tune Home Tuning
Same car, other engines
Mazda Mazda 3 2003 - 2009: every engine we tune
1.6 MZ-CD - 110HP110 → 140 bhp
1.6 MZ-CD - 90HP90 → 120 bhp
2.2 MZR-CD - 185HP185 → 210 bhp
2.3T MPS - 260HP260 → 305 bhp
All Mazda Mazda 3 engines (69) · Every Mazda we tune (273) · All makes
Fixed price
Ask about your Mazda Mazda 3 2.0 MZ-CD
Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.
Questions
Mazda Mazda 3 2.0 MZ-CD remap questions
How much power does a Stage 1 remap add to a Mazda Mazda 3 2.0 MZ-CD?
27 bhp and 50 Nm. Standard is 143 bhp / 360 Nm; Stage 1 is 170 bhp / 410 Nm. That is a 19% power gain and 14% more torque.
How do I get a price for a Mazda Mazda 3 2.0 MZ-CD remap?
Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.
Is a Stage 1 remap safe for this engine?
Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.
Will a remap affect the DPF or AdBlue on a Mazda Mazda 3 2.0 MZ-CD?
No. A Stage 1 remap keeps every emissions system as the factory fitted it. We do not remove or disable the DPF, EGR or AdBlue system as part of a remap.
How long does it take, and can it be reversed?
A Stage 1 remap is done in a single visit, usually the same day. The original software is stored and can be restored on request.
Meet the team
The team behind every job
Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.
Newsletter
Offers on parts and tuning, first
A short email now and then: new vehicle support, parts deals, open days. Nothing daily.