Buy Now. Pay With 
Learn More
Every car ›Land Rover ›Range Rover ›L405 (2012 - 2018 ) ›3.0 TDV6
Diesel · 3.0 litre · Maidstone, KentLand Rover Range Rover 3.0 TDV6 remap211 to 300 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.
A Stage 1 remap takes the Land Rover Range Rover 3.0 TDV6 from 211 to 300 bhp and from 520 to 650 Nm: 89 bhp and 130 Nm more, on standard hardware. Diesels gain most in torque, so the change shows as pull from low revs and less gear-changing under load, not just a higher peak figure. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.
Stage 1 on this engine
What the Land Rover Range Rover 3.0 TDV6 makes, standard and remapped
Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.
211→300
BHP · Power · +89
520→650
NM · Torque · +130
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
Stage 1 powerStage 1 torque (dashed)Standard
Drawn from the quoted peaks: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.
In the shop
Parts that fit the Land Rover Range Rover 3.0 TDV6
Listed for this engine, fitted here or shipped. Anything from this list can be added to a Stage 2 build.
Same car, other engines
Land Rover Range Rover L405 (2012 - 2018 ): every engine we tune
3.0 SDV6 - 292HP292 → 320 bhp
3.0 SDV6 - 306HP306 → 330 bhp
3.0 SDV6 Hybrid - 340HP340 → 380 bhp
3.0 TDV6 - 258HP255 → 300 bhp
3.0 V6 Supercharged - 340HP340 → 400 bhp
4.4 SDV8 - 339HP339 → 390 bhp
5.0 V8 Supercharged - 510HP510 → 560 bhp
5.0 V8 Supercharged SVR - 550HP550 → 570 bhp
All Land Rover Range Rover engines (77) · Every Land Rover we tune (508) · All makes
Case study One we have actually done: the write-up, figures and photos for this car.Read it →Case studies
Land Rover Range Rover cars we have tuned
Introducing Workshop 2: Expanding Our Reach for Exceptional Vehicle ServicingWe are thrilled to announce a major milestone at JF Automotive – the opening of Workshop 2! As a testament to our…Read the case study →
Land Rover ECU RemappingJF Automotive - a Kent UK based company have become market leaders for ECU re-calibration for more power and enhanced fuel efficiency. Calibrating…Read the case study →Fixed price
Ask about your Land Rover Range Rover 3.0 TDV6
Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.
Questions
Land Rover Range Rover 3.0 TDV6 remap questions
How much power does a Stage 1 remap add to a Land Rover Range Rover 3.0 TDV6?
89 bhp and 130 Nm. Standard is 211 bhp / 520 Nm; Stage 1 is 300 bhp / 650 Nm. That is a 42% power gain and 25% more torque.
How do I get a price for a Land Rover Range Rover 3.0 TDV6 remap?
Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.
Is a Stage 1 remap safe for this engine?
Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.
Will a remap affect the DPF or AdBlue on a Land Rover Range Rover 3.0 TDV6?
No. A Stage 1 remap keeps every emissions system as the factory fitted it. We do not remove or disable the DPF, EGR or AdBlue system as part of a remap.
How long does it take, and can it be reversed?
A Stage 1 remap is done in a single visit, usually the same day. The original software is stored and can be restored on request.
Meet The Team
Search Tuning...
Search our ECU tuning options to increase the power and torque of your vehicle and our wide range of performance parts.