Buy Now. Pay With 
Learn More
Every car ›Land Rover ›Evoque ›2019 - ›P300
Petrol · 2.0 litre · Maidstone, KentLand Rover Evoque P300 remap300 to 320 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.
A Stage 1 remap takes the Land Rover Evoque P300 from 300 to 320 bhp and from 400 to 450 Nm: 20 bhp and 50 Nm more, on standard hardware. On a turbocharged petrol the gain comes from boost, fuelling and ignition timing recalibrated within the limits of the standard turbo and injectors. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.
Stage 1 on this engine
What the Land Rover Evoque P300 makes, standard and remapped
Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.
300→320
BHP · Power · +20
400→450
NM · Torque · +50
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
Stage 1 powerStage 1 torque (dashed)Standard
Drawn from the quoted peaks: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.
In the shop
Parts that fit the Land Rover Evoque P300
Listed for this engine, fitted here or shipped. Anything from this list can be added to a Stage 2 build.
Same car, other engines
Land Rover Evoque 2019 -: every engine we tune
D150 - 150HP150 → 180 bhp
D180 - 180HP180 → 210 bhp
D200 - 200HP200 → 225 bhp
D240 - 240HP240 → 260 bhp
P200 - 200HP200 → 230 bhp
P250 - 250HP250 → 270 bhp
All Land Rover Evoque engines (66) · Every Land Rover we tune (508) · All makes
Case study One we have actually done: the write-up, figures and photos for this car.Read it →Case studies
Land Rover Evoque cars we have tuned
Introducing Workshop 2: Expanding Our Reach for Exceptional Vehicle ServicingWe are thrilled to announce a major milestone at JF Automotive – the opening of Workshop 2! As a testament to our…Read the case study →
Land Rover ECU RemappingJF Automotive - a Kent UK based company have become market leaders for ECU re-calibration for more power and enhanced fuel efficiency. Calibrating…Read the case study →Fixed price
Ask about your Land Rover Evoque P300
Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.
Questions
Land Rover Evoque P300 remap questions
How much power does a Stage 1 remap add to a Land Rover Evoque P300?
20 bhp and 50 Nm. Standard is 300 bhp / 400 Nm; Stage 1 is 320 bhp / 450 Nm. That is a 7% power gain and 13% more torque.
How do I get a price for a Land Rover Evoque P300 remap?
Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.
Is a Stage 1 remap safe for this engine?
Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.
Does a remap affect the warranty on a Land Rover Evoque P300?
A manufacturer can decline a warranty claim on a part they can show was affected by the remap. We tell you plainly what that means for your car and your warranty position before anything is done.
How long does it take, and can it be reversed?
A Stage 1 remap is done in a single visit, usually the same day. The original software is stored and can be restored on request.
Meet The Team
Search Tuning...
Search our ECU tuning options to increase the power and torque of your vehicle and our wide range of performance parts.