Buy Now. Pay With 
Learn More
Every car ›Lancia ›Phedra ›2002 - ›2.0 Jtd 16V
Diesel · 2.0 litre · Maidstone, KentLancia Phedra 2.0 Jtd 16V remap120 to 165 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.
A Stage 1 remap takes the Lancia Phedra 2.0 Jtd 16V from 120 to 165 bhp and from 306 to 380 Nm: 45 bhp and 74 Nm more, on standard hardware. Diesels gain most in torque, so the change shows as pull from low revs and less gear-changing under load, not just a higher peak figure. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.
Stage 1 on this engine
What the Lancia Phedra 2.0 Jtd 16V makes, standard and remapped
Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.
120→165
BHP · Power · +45
306→380
NM · Torque · +74
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
Stage 1 powerStage 1 torque (dashed)Standard
Drawn from the quoted peaks: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.
In the shop
Parts that fit the Lancia Phedra 2.0 Jtd 16V
Listed for this engine, fitted here or shipped. Anything from this list can be added to a Stage 2 build.
Same car, other engines
Lancia Phedra 2002 -: every engine we tune
2.0 Jtd 16V - 136HP136 → 165 bhp
2.0Jtd 16V - 109HP109 → 130 bhp
2.2 Jtd 16V - 163HP163 → 200 bhp
2.2 Jtd 16V - 170HP170 → 200 bhp
2.2Jtd 16V - 128HP128 → 160 bhp
All Lancia Phedra engines (20) · Every Lancia we tune (106) · All makes
Fixed price
Ask about your Lancia Phedra 2.0 Jtd 16V
Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.
Questions
Lancia Phedra 2.0 Jtd 16V remap questions
How much power does a Stage 1 remap add to a Lancia Phedra 2.0 Jtd 16V?
45 bhp and 74 Nm. Standard is 120 bhp / 306 Nm; Stage 1 is 165 bhp / 380 Nm. That is a 38% power gain and 24% more torque.
How do I get a price for a Lancia Phedra 2.0 Jtd 16V remap?
Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.
Is a Stage 1 remap safe for this engine?
Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.
Will a remap affect the DPF or AdBlue on a Lancia Phedra 2.0 Jtd 16V?
No. A Stage 1 remap keeps every emissions system as the factory fitted it. We do not remove or disable the DPF, EGR or AdBlue system as part of a remap.
How long does it take, and can it be reversed?
A Stage 1 remap is done in a single visit, usually the same day. The original software is stored and can be restored on request.
Meet the team
The team behind every job
Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.
Newsletter
Offers on parts and tuning, first
A short email now and then: new vehicle support, parts deals, open days. Nothing daily.