Buy Now. Pay With 
Learn More
Every car ›Jeep ›Grand Cherokee ›2011 - ›2.0 Multijet
Diesel · 2.0 litre · Maidstone, KentJeep Grand Cherokee 2.0 Multijet remap140 to 185 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.
A Stage 1 remap takes the Jeep Grand Cherokee 2.0 Multijet from 140 to 185 bhp and from 350 to 400 Nm: 45 bhp and 50 Nm more, on standard hardware. Diesels gain most in torque, so the change shows as pull from low revs and less gear-changing under load, not just a higher peak figure. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.
Stage 1 on this engine
What the Jeep Grand Cherokee 2.0 Multijet makes, standard and remapped
Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.
140→185
BHP · Power · +45
350→400
NM · Torque · +50
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
Stage 1 powerStage 1 torque (dashed)Standard
Drawn from the quoted peaks: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.
In the shop
Parts that fit the Jeep Grand Cherokee 2.0 Multijet
Listed for this engine, fitted here or shipped. Anything from this list can be added to a Stage 2 build.
Same car, other engines
Jeep Grand Cherokee 2011 -: every engine we tune
2.0 Multijet - 170HP170 → 200 bhp
2.0 Multijet - 190HP190 → 280 bhp
2.0 Multijet - 241HP241 → 280 bhp
3.0 CRD - 190HP190 → 280 bhp
3.0 CRD - 250HP250 → 285 bhp
3.0 Multijet - 250HP250 → 280 bhp
SRT8 - 475HP475 → 495 bhp
Trackhawk V8 Supercharged - 707HP707 → 740 bhp
All Jeep Grand Cherokee engines (32) · Every Jeep we tune (208) · All makes
Fixed price
Ask about your Jeep Grand Cherokee 2.0 Multijet
Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.
Questions
Jeep Grand Cherokee 2.0 Multijet remap questions
How much power does a Stage 1 remap add to a Jeep Grand Cherokee 2.0 Multijet?
45 bhp and 50 Nm. Standard is 140 bhp / 350 Nm; Stage 1 is 185 bhp / 400 Nm. That is a 32% power gain and 14% more torque.
How do I get a price for a Jeep Grand Cherokee 2.0 Multijet remap?
Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.
Is a Stage 1 remap safe for this engine?
Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.
Will a remap affect the DPF or AdBlue on a Jeep Grand Cherokee 2.0 Multijet?
No. A Stage 1 remap keeps every emissions system as the factory fitted it. We do not remove or disable the DPF, EGR or AdBlue system as part of a remap.
How long does it take, and can it be reversed?
A Stage 1 remap is done in a single visit, usually the same day. The original software is stored and can be restored on request.
Meet The Team
Search Tuning...
Search our ECU tuning options to increase the power and torque of your vehicle and our wide range of performance parts.