Buy Now. Pay With 
Learn More
Every car ›Fiat ›Panda ›2012 - 2017 ›1.3 JTD
Diesel · 1.3 litre · Maidstone, KentFiat Panda 1.3 JTD remap75 to 95 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.
A Stage 1 remap takes the Fiat Panda 1.3 JTD from 75 to 95 bhp and from 145 to 245 Nm: 20 bhp and 100 Nm more, on standard hardware. Diesels gain most in torque, so the change shows as pull from low revs and less gear-changing under load, not just a higher peak figure. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.
Stage 1 on this engine
What the Fiat Panda 1.3 JTD makes, standard and remapped
Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.
75→95
BHP · Power · +20
145→245
NM · Torque · +100
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
Stage 1 powerStage 1 torque (dashed)Standard
Drawn from the quoted peaks: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.
In the shop
Parts that fit the Fiat Panda 1.3 JTD
Listed for this engine, fitted here or shipped. Anything from this list can be added to a Stage 2 build.
Same car, other engines
Fiat Panda 2012 - 2017: every engine we tune
0.9 TwinAir - 85HP85 → 95 bhp
0.9 TwinAir - 90HP90 → 95 bhp
1.3 JTDm - 70HP70 → 85 bhp
1.3 Multijet - 80HP80 → 100 bhp
1.3 Multijet - 95HP95 → 120 bhp
All Fiat Panda engines (36) · Every Fiat we tune (768) · All makes
Case studies
Fiat Panda cars we have tuned
Introducing Workshop 2: Expanding Our Reach for Exceptional Vehicle ServicingWe are thrilled to announce a major milestone at JF Automotive – the opening of Workshop 2! As a testament to our…Read the case study →
Fiat 500 Abarth Engine ECU RemappingFiat Abarth 500 ECU Remapping for the every day driver or track fun user. The new 500 has been a massive success for Fiat,…Read the case study →Fixed price
Ask about your Fiat Panda 1.3 JTD
Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.
Questions
Fiat Panda 1.3 JTD remap questions
How much power does a Stage 1 remap add to a Fiat Panda 1.3 JTD?
20 bhp and 100 Nm. Standard is 75 bhp / 145 Nm; Stage 1 is 95 bhp / 245 Nm. That is a 27% power gain and 69% more torque.
How do I get a price for a Fiat Panda 1.3 JTD remap?
Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.
Is a Stage 1 remap safe for this engine?
Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.
Will a remap affect the DPF or AdBlue on a Fiat Panda 1.3 JTD?
No. A Stage 1 remap keeps every emissions system as the factory fitted it. We do not remove or disable the DPF, EGR or AdBlue system as part of a remap.
How long does it take, and can it be reversed?
A Stage 1 remap is done in a single visit, usually the same day. The original software is stored and can be restored on request.
Meet the team
The team behind every job
Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.
Newsletter
Offers on parts and tuning, first
A short email now and then: new vehicle support, parts deals, open days. Nothing daily.