4.8 2,200+ reviews
4.8★★★★★2,200+ reviewsClosed · opens today 8am
Contact us
Searches the whole site: cars we tune, parts, case studies, the Help Centre, services and news. Try RS21JFAP0420Golf RMilltekAdBlue
4.8★★★★★2,200+ reviewsClosed · opens today 8am
Stage 1, 2 and 3 figures and the price for your exact engine
Klarna0% finance availableBuy now, pay later on tuning, servicing and parts

Every car Fiat Ducato 2019 - 2021 2.3 MultiJet

Diesel · 2.3 litre · Maidstone, Kent

Fiat Ducato 2.3 MultiJet remap140 to 200 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.

A Stage 1 remap takes the Fiat Ducato 2.3 MultiJet from 140 to 200 bhp and from 350 to 460 Nm: 60 bhp and 110 Nm more, on standard hardware. Diesels gain most in torque, so the change shows as pull from low revs and less gear-changing under load, not just a higher peak figure. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.

Stage 1 on this engine

What the Fiat Ducato 2.3 MultiJet makes, standard and remapped

Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.

140200
BHP · Power · +60
350460
NM · Torque · +110
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
1k 2k 3k 4k 5k 200 BHP 460 NM
Stage 1 powerStage 1 torque (dashed)Standard

Drawn from the quoted peaks and this engine’s peak rpm from our vehicle data: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.

In the shop

Parts that fit the Fiat Ducato 2.3 MultiJet

Listed for this engine, fitted here or shipped. Anything from this list can be added to a Stage 2 build.

Same car, other engines

Fiat Ducato 2019 - 2021: every engine we tune

All Fiat Ducato engines (78) · Every Fiat we tune (768) · All makes

Fixed price

Ask about your Fiat Ducato 2.3 MultiJet

Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.

Before you send, want our discount codes?
Occasional offers on tuning, parts and servicing. No spam, and you can unsubscribe in one click.

Got it. We will come back with the figures and a fixed price for your car.

If you know them, these help us get the quote right first time. Entirely optional.

Loading the form…

Questions

Fiat Ducato 2.3 MultiJet remap questions

How much power does a Stage 1 remap add to a Fiat Ducato 2.3 MultiJet?

60 bhp and 110 Nm. Standard is 140 bhp / 350 Nm; Stage 1 is 200 bhp / 460 Nm. That is a 43% power gain and 31% more torque.

How do I get a price for a Fiat Ducato 2.3 MultiJet remap?

Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.

Is a Stage 1 remap safe for this engine?

Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.

Will a remap affect the DPF or AdBlue on a Fiat Ducato 2.3 MultiJet?

No. A Stage 1 remap keeps every emissions system as the factory fitted it. We do not remove or disable the DPF, EGR or AdBlue system as part of a remap.

How long does it take, and can it be reversed?

A Stage 1 remap is done in a single visit, usually the same day. The original software is stored and can be restored on request.

The JF Automotive team
Meet the team

The team behind every job

Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.

Newsletter

Offers on parts and tuning, first

A short email now and then: new vehicle support, parts deals, open days. Nothing daily.