Buy Now. Pay With 
Learn More
Every car ›BMW ›M6 ›E63 (2004 - 2011) ›Standard
Petrol · 5.0 litre · Maidstone, KentBMW M6 Standard remap507 to 537 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.
A Stage 1 remap takes the BMW M6 Standard from 507 to 537 bhp and from 520 to 550 Nm: 30 bhp and 30 Nm more, on standard hardware. On a turbocharged petrol the gain comes from boost, fuelling and ignition timing recalibrated within the limits of the standard turbo and injectors. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.
Stage 1 on this engine
What the BMW M6 Standard makes, standard and remapped
Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.
507→537
BHP · Power · +30
520→550
NM · Torque · +30
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
Stage 1 powerStage 1 torque (dashed)Standard
Drawn from the quoted peaks: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.
In the shop
Parts that fit the BMW M6 Standard
Listed for this engine, fitted here or shipped. Anything from this list can be added to a Stage 2 build.
Eventuri Black Carbon Intake System for BMW M6 Standard – 507HP – E63 (2004 – 2011)
£1,133.00
Eventuri Induction Kit
Auto Gearbox Tuner for BMW M6 E63 (2004 – 2011) Standard – 507HP
£311.25
Elite Flash Gearbox Tuning
Touch Tune – Remote Tuner for BMW M6 Standard – 507HP
£512.50
JFA Touch Tune Home Tuning
Case studies
BMW M6 cars we have tuned
BMW Plug-In Hybrid Tuning: 330e, 530e, 545e, X5 45e and i8Plug-in hybrid BMWs are the cars we get asked about most often by owners who are disappointed with them. Not because they…Read the case study →
BMW M5 F90 M139 2019-BMW M5 TUNING F90 (2017 - 2019)The BMW M5 F90 is an incredible vehicle that holds even greater potential with our JFA…Read the case study →
BMW M135i & M235i 2013-2021BMW M135i & M235i TUNING F2x (2013 - 2021) We've put together an exceptional lineup of upgrades for the BMW M135i &…Read the case study →Fixed price
Ask about your BMW M6 Standard
Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.
Questions
BMW M6 Standard remap questions
How much power does a Stage 1 remap add to a BMW M6 Standard?
30 bhp and 30 Nm. Standard is 507 bhp / 520 Nm; Stage 1 is 537 bhp / 550 Nm. That is a 6% power gain and 6% more torque.
How do I get a price for a BMW M6 Standard remap?
Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.
Is a Stage 1 remap safe for this engine?
Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.
Does a remap affect the warranty on a BMW M6 Standard?
A manufacturer can decline a warranty claim on a part they can show was affected by the remap. We tell you plainly what that means for your car and your warranty position before anything is done.
How long does it take, and can it be reversed?
A Stage 1 remap is done in a single visit, usually the same day. The original software is stored and can be restored on request.
Meet the team
The team behind every job
Technicians, calibrators and the front desk, all in Maidstone. No call centre and no subcontracting - the person who books you in is the person you can ask about the job.
Newsletter
Offers on parts and tuning, first
A short email now and then: new vehicle support, parts deals, open days. Nothing daily.