Buy Now. Pay With 
Learn More
Every car ›Toyota ›GR86 ›2022 - ›2.4 D-4S
Petrol · 2.4 litre · Maidstone, KentToyota GR86 2.4 D-4S remap231 to 231 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.
A Stage 1 remap takes the Toyota GR86 2.4 D-4S from 231 to 231 bhp and from 250 to 250 Nm: 0 bhp and 0 Nm more, on standard hardware. On a turbocharged petrol the gain comes from boost, fuelling and ignition timing recalibrated within the limits of the standard turbo and injectors. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.
Stage 1 on this engine
What the Toyota GR86 2.4 D-4S makes, standard and remapped
Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.
231→231
BHP · Power · +0
250→250
NM · Torque · +0
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
Stage 1 powerStage 1 torque (dashed)Standard
Drawn from the quoted peaks: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.
Same car, other engines
Toyota GR86 2022 -: every engine we tune
All Toyota GR86 engines (1) · Every Toyota we tune (390) · All makes
Case studies
Toyota GR86 cars we have tuned
Toyota Yaris GR 1.6T 2020-TOYOTA YARIS GR TUNING 1.6T (2020 - Present) We are big fans of the Toyota Yaris GR 2020 model, so much so…Read the case study →
Introducing Workshop 2: Expanding Our Reach for Exceptional Vehicle ServicingWe are thrilled to announce a major milestone at JF Automotive – the opening of Workshop 2! As a testament to our…Read the case study →
Yaris GR Tuning PackageYaris GR Engine Tuning First off with our adaptive tuning module that uses multi-channels to take the mighty Yaris GR to 301BHP…Read the case study →Fixed price
Ask about your Toyota GR86 2.4 D-4S
Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.
Questions
Toyota GR86 2.4 D-4S remap questions
How much power does a Stage 1 remap add to a Toyota GR86 2.4 D-4S?
0 bhp and 0 Nm. Standard is 231 bhp / 250 Nm; Stage 1 is 231 bhp / 250 Nm. That is a 0% power gain and 0% more torque.
How do I get a price for a Toyota GR86 2.4 D-4S remap?
Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.
Is a Stage 1 remap safe for this engine?
Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.
Does a remap affect the warranty on a Toyota GR86 2.4 D-4S?
A manufacturer can decline a warranty claim on a part they can show was affected by the remap. We tell you plainly what that means for your car and your warranty position before anything is done.
How long does it take, and can it be reversed?
A Stage 1 remap is done in a single visit, usually the same day. The original software is stored and can be restored on request.
Meet The Team
Search Tuning...
Search our ECU tuning options to increase the power and torque of your vehicle and our wide range of performance parts.