Buy Now. Pay With 
Learn More
Every car ›Jeep ›Commander ›2006 - 2011 ›2.2 CRD
Diesel · 2.2 litre · Maidstone, KentJeep Commander 2.2 CRD remap136 to 180 bhp with Stage 1 software. The figures, the parts and the other engines in this car, on one page.
A Stage 1 remap takes the Jeep Commander 2.2 CRD from 136 to 180 bhp and from 320 to 380 Nm: 44 bhp and 60 Nm more, on standard hardware. Diesels gain most in torque, so the change shows as pull from low revs and less gear-changing under load, not just a higher peak figure. It is done in a visit at our Maidstone workshop and the original file is kept, so it can go back to standard.
Stage 1 on this engine
What the Jeep Commander 2.2 CRD makes, standard and remapped
Standard is the factory figure. Stage 1 is the calibration we run on this engine, software only, nothing bolted on.
136→180
BHP · Power · +44
320→380
NM · Torque · +60
Stage 2 and Stage 3 figures, and the price for each, are in the calculator for this exact engine.Open the calculator →
Stage 1 powerStage 1 torque (dashed)Standard
Drawn from the quoted peaks: torque peaks at the quoted Nm, power is derived from it. A measured before-and-after graph comes with a dyno session.
In the shop
Parts that fit the Jeep Commander 2.2 CRD
Listed for this engine, fitted here or shipped. Anything from this list can be added to a Stage 2 build.
Same car, other engines
Jeep Commander 2006 - 2011: every engine we tune
All Jeep Commander engines (12) · Every Jeep we tune (208) · All makes
Fixed price
Ask about your Jeep Commander 2.2 CRD
Registration and which stage. We come back with what it needs, what it makes and what it costs, usually the same day.
Questions
Jeep Commander 2.2 CRD remap questions
How much power does a Stage 1 remap add to a Jeep Commander 2.2 CRD?
44 bhp and 60 Nm. Standard is 136 bhp / 320 Nm; Stage 1 is 180 bhp / 380 Nm. That is a 32% power gain and 19% more torque.
How do I get a price for a Jeep Commander 2.2 CRD remap?
Put the registration into the calculator and it prices Stage 1, 2 and 3 for this exact engine, or send the form on this page and we come back with a fixed price, usually the same day.
Is a Stage 1 remap safe for this engine?
Stage 1 stays inside what the standard turbo, injectors, clutch and cooling were built to take. The figures above are the calibration we run, not a maximum. The car is checked for stored faults before and after, and the original file is kept so it can go back on.
Will a remap affect the DPF or AdBlue on a Jeep Commander 2.2 CRD?
No. A Stage 1 remap keeps every emissions system as the factory fitted it. We do not remove or disable the DPF, EGR or AdBlue system as part of a remap.
How long does it take, and can it be reversed?
A Stage 1 remap is done in a single visit, usually the same day. The original software is stored and can be restored on request.
Meet The Team
Search Tuning...
Search our ECU tuning options to increase the power and torque of your vehicle and our wide range of performance parts.