Auto Gearbox Tuner for Alfa Romeo Stelvio 2.2 JTD – 210HP
Product code: JFAEF1101
The Elite Flash provides gearbox tuning to increase the performance and drivability of the Stelvio automatic gearbox. Elite Flash is an OBD flash tool that not only unlocks manufacturer’s transmission settings within the vehicles ECU to give smoother and quicker gear shifts, It also now provides an adaptation reset as standard which helps you get the most from your Stelvio. This is a great tool in releasing the most from you vehicle.
WHAT DOES TCU ELITE FLASH OBD TOOL OFFER?
Up to 40% faster gearshifts.
Locks up torque converter at lower rpm.
Smoother gear shifting.
Faster reaction to paddle shift inputs.
Quicker acceleration.
Increased efficiency.
Invisible to dealer diagnostics.
Will not change flash counter.
£328.99£279.65
Elite Flash Auto Gearbox Tune Features
HOW DO I USE THE OBD TOOL?
It’s really very easy to use.
Switch ignition On
Plug flash tool into OBD port
Wait between 30-90 seconds and the tool will beep.
Switch ignition Off
Start engine and allow it to idle for 5 minutes
Done.
Now all you need to do is let the adaptions take place over 50-100 miles to feel the full benefit of Elite Flash.
IS THE TOOL REUSABLE?
It’s only reusable on the first vehicle it flashes as it will lock to the vehicles VIN. If your vehicle goes into dealer for a software update, then you may re-flash your gearbox again as many times as you like.
DO NOT plug this into another vehicle as this can cause damage to the ECU or VIN Data.
HOW DOES THIS GEARBOX TUNING TOOL WORK?
By plugging this OBD tool into your car it communicates to the cars on board network via OBD which allows access to the ECU, TCU and other controllers if required to adjust/reset the shift strategies within the OEM control components to “point” or “re-address” these strategies to the best and most optimal settings.
This includes changing the transmission shift speed pointer to a faster/different setting. We can do this safely and without fault because of the wide tolerances vehicle manufactures build into software and hardware. They all contain similar if not the same generation components, usually built in the same factory, but have model specific software strategies that are used for their specific application.
